Happy New Years - What mods have you got planned?

bmwheath · 01-02-2016, 05:11 AM

Quote:

Originally Posted by mikenazz

Waiting for peoples results on the hexon turbo upgrade group buy. Then ill be in the next group buy.

I will keep you posted on how the RR600's perform. I have a benchmark of 11.6 1/4 mile time with stock turbos to compare against

DR-JEKL · 01-02-2016, 05:21 AM

Quote:

Originally Posted by EB89

I'm booked in at advan to have the Jb4, AR catless downpipe and BMR FMIC installed. Was meant to happen before Xmas but the parts didn't arrive on time, obviously I got excited and updated my sig prematurely.

I've also purchased a full carbon fibre interior trim kit from the states, should be arriving January some time. Should be glossy with UV protection

I would like to get some ceramic pads and DBA rotors, and too get MPSS tyres and get some spacers to make the stance a bit wider.

You'll love the car after those mods!

Hmm just checking, you do know LHD trim kit won't fit a RHD vehicle right!?

bradsm87 · 01-02-2016, 05:42 AM

Custom Hexon turbos, Hexon inlets, custom compressor outlet pipes and a new tune from scratch based on a PPK bin with both fuel scalar and WGDC base table perfectly tuned in all cells for perfect part-throttle and load per gear operation. I'll be a verrry happy chappy once all that is done!

EB89 · 01-02-2016, 06:07 AM

Quote:

Originally Posted by DR-JEKL

You'll love the car after those mods!

Hmm just checking, you do know LHD trim kit won't fit a RHD vehicle right!?

Ya, I checked that

, took a long time to find a place to make RHD trims, this one isn't genuine, it's hand made, they take genuine trim and apply CF to it then coat with clear and UV protectant etc, he said it's the same process the genuine ones go through.

CashedUpBogan · 01-02-2016, 06:59 AM

10s

CashedUpBogan · 01-02-2016, 07:01 AM

lol troll. Impossible in my fatty boombah E93. And 6AT. Aiming for low 11s

OnlyDriveGerman · 01-02-2016, 08:36 AM

kW v1's are getting installed and a professional wetsand in the spring. Doing the valve cover gasket this weekend, have it off at the moment. Time to clean and reinstall.

PG · 01-02-2016, 08:57 AM

Rb pcv valve and downpipes soon. Will diy it.

DR-JEKL · 01-03-2016, 01:47 AM

Quote:

Originally Posted by EB89

Ya, I checked that

, took a long time to find a place to make RHD trims, this one isn't genuine, it's hand made, they take genuine trim and apply CF to it then coat with clear and UV protectant etc, he said it's the same process the genuine ones go through.

Sounds good, will be keen to see the pics!

vtl · 01-03-2016, 01:55 AM

Need to fit my M3 LSD and new clutch.

Nicholas Bentley · 01-03-2016, 06:22 AM

100% stock 2011 335i E90 right now. Going to start modding it this year. 1st, looking to add around 150 to 200 HP. 2nd, start learning how to code and tweaking some things here and there. Maybe upgrade the CIC to NBT. Add backup camera and maybe PDC. Then, ...., well, let me start with those things first.

T1M · 01-03-2016, 08:25 AM

FMIC for sure. That will probably do me.

tova86 · 01-11-2016, 02:14 AM

Just got a great deal on a gtr carbon fiber hood!

EB89 · 01-11-2016, 02:20 AM

Quote:

Originally Posted by tova86

Just got a great deal on a gtr carbon fiber hood!

Pics of said hood

totti84 · 01-11-2016, 03:00 AM

Installed VTT inlets last week! Now seeing 20psi on stock turbos with my old flash.
Will be getting a new custom flash within the next few weeks

Socket · 01-11-2016, 03:07 AM

Quote:

Originally Posted by totti84

Installed VTT inlets last week! Now seeing 20psi on stock turbos with my old flash.
Will be getting a new custom flash within the next few weeks

Nice Totti, Im trying to get a response from Wedge so I can get a custom tune for mine

totti84 · 01-11-2016, 03:10 AM

Quote:

Originally Posted by Socket

Quote:

Originally Posted by totti84

Installed VTT inlets last week! Now seeing 20psi on stock turbos with my old flash.
Will be getting a new custom flash within the next few weeks

Nice Totti, Im trying to get a response from Wedge so I can get a custom tune for mine

You still rocking Cobb or switched to MHD?

I'm personally not a fan of Wedge, will be going with Trebila as many locals have had great results with him!

Socket · 01-11-2016, 03:11 AM

Quote:

Originally Posted by totti84

You still rocking Cobb or switched to MHD?

I'm personally not a fan of Wedge, will be going with Trebila as many locals have had great results with him!

MHD, Id got with Trebila but Im in Melb
Does he do work outside Sydney?

totti84 · 01-11-2016, 03:12 AM

Quote:

Originally Posted by Socket

Quote:

Originally Posted by totti84

You still rocking Cobb or switched to MHD?

I'm personally not a fan of Wedge, will be going with Trebila as many locals have had great results with him!

MHD, Id got with Trebila but Im in Melb
Does he do work outside Sydney?

He is based in France lol.. Just email him and he will look after you

E85 335 · 01-11-2016, 03:13 AM

Only have 3 things to do now. Port Injection and Wavetac LSD and Advan's Hotside charge pipe. I will have a BMS Meth system for sale once I get the Port injection though lol

Socket · 01-11-2016, 03:13 AM

Quote:

Originally Posted by totti84

He is based in France lol.. Just email him and he will look after you

Oh lol.. can you PM me email if you have it Totti??

totti84 · 01-11-2016, 03:18 AM

Quote:

Originally Posted by Socket

Quote:

Originally Posted by totti84

He is based in France lol.. Just email him and he will look after you

Oh lol.. can you PM me email if you have it Totti??

http://www.n54tech.com/forums/showthread.php?t=33175

01-02-2016, 05:42 AM	#25
bradsm87 Lieutenant Colonel 618 Rep 1,698 Posts Drives: G20 330i & F25 LCI xDrive30d Join Date: Jun 2013 Location: Australia iTrader: (0)	Custom Hexon turbos, Hexon inlets, custom compressor outlet pipes and a new tune from scratch based on a PPK bin with both fuel scalar and WGDC base table perfectly tuned in all cells for perfect part-throttle and load per gear operation. I'll be a verrry happy chappy once all that is done!
	Appreciate 0 Quote

01-02-2016, 06:59 AM	#27
CashedUpBogan Lieutenant Colonel 288 Rep 1,808 Posts Drives: State Transit Bus Join Date: Sep 2014 Location: Australia iTrader: (0)	10s
	Appreciate 0 Quote

01-02-2016, 07:01 AM	#28
CashedUpBogan Lieutenant Colonel 288 Rep 1,808 Posts Drives: State Transit Bus Join Date: Sep 2014 Location: Australia iTrader: (0)	lol troll. Impossible in my fatty boombah E93. And 6AT. Aiming for low 11s
	Appreciate 0 Quote

01-02-2016, 08:36 AM	#29
OnlyDriveGerman Lieutenant 194 Rep 527 Posts Drives: 2007 328xi Coupe 6MT Join Date: Dec 2014 Location: New Haven County, CT iTrader: (1)	kW v1's are getting installed and a professional wetsand in the spring. Doing the valve cover gasket this weekend, have it off at the moment. Time to clean and reinstall.
	Appreciate 0 Quote

01-02-2016, 08:57 AM	#30
PG Second Lieutenant 41 Rep 244 Posts Drives: 2008 135i Join Date: May 2015 Location: Sydney iTrader: (0)	Rb pcv valve and downpipes soon. Will diy it.
	Appreciate 0 Quote

01-03-2016, 01:55 AM	#32
vtl Brigadier General 1539 Rep 3,149 Posts Drives: 2008 BMW 135i MT Join Date: Apr 2015 Location: Melbourne, Australia iTrader: (0)	Need to fit my M3 LSD and new clutch. __________________ Build Thread
	Appreciate 0 Quote

01-03-2016, 06:22 AM	#33
Nicholas Bentley Private 22 Rep 67 Posts Drives: 2011 BMW 335i E90 LCI N55 Join Date: Jan 2016 Location: Atlanta, GA iTrader: (0)	100% stock 2011 335i E90 right now. Going to start modding it this year. 1st, looking to add around 150 to 200 HP. 2nd, start learning how to code and tweaking some things here and there. Maybe upgrade the CIC to NBT. Add backup camera and maybe PDC. Then, ...., well, let me start with those things first.
	Appreciate 0 Quote

01-03-2016, 08:25 AM	#34
T1M Captain 198 Rep 657 Posts Drives: AW MY12 1M Join Date: Jun 2015 Location: Melbourne, Australia iTrader: (0)	FMIC for sure. That will probably do me.
	Appreciate 0 Quote

01-11-2016, 02:14 AM	#35
tova86 RACE CAR!! 37 Rep 568 Posts Drives: 09 335i AW sedan Join Date: May 2013 Location: San Diego, CA iTrader: (1)	Just got a great deal on a gtr carbon fiber hood!
	Appreciate 0 Quote

01-11-2016, 03:00 AM	#37
totti84 Major 119 Rep 1,141 Posts Drives: N54 135i 6MT Join Date: Aug 2014 Location: Sydney, Australia iTrader: (5) Garage List 2009 BMW 135i M Sport [0.00]	Installed VTT inlets last week! Now seeing 20psi on stock turbos with my old flash. Will be getting a new custom flash within the next few weeks
	Appreciate 0 Quote

01-11-2016, 03:13 AM	#42
E85 335 First Lieutenant 61 Rep 330 Posts Drives: BMW 2006 E92 335i Coupe Join Date: Dec 2015 Location: Gold Coast iTrader: (0)	Only have 3 things to do now. Port Injection and Wavetac LSD and Advan's Hotside charge pipe. I will have a BMS Meth system for sale once I get the Port injection though lol __________________ Aussie e92 335i. Pure Stage 2 Twin Turbos, Pure Performance Motorsport's Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, PRP Coil Kit, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
	Appreciate 0 Quote