[HammerXI]

Working on my 2011 E92 right now (N55) and am trying to identity if this connector (blue) is the issue to my car- it was covered it oil and runs into my dme anyone know what this is / how to unclip for inspection? The DME connectors are in red it sits just below the manifold and is connected to the black junction box

Thanks again
-AH

[eljay]

It looks like it has a release clip on the raised part (on the left in your picture) just above the BMW lettering.
Yes, check it for oil and if you don't see any wicking at the DME connector, you should be safe. Oil can travel easily and quite far along harnesses.

[HammerXI]

Originally Posted by eljay

It looks like it has a release clip on the raised part (on the left in your picture) just above the BMW lettering.
Yes, check it for oil and if you don't see any wicking at the DME connector, you should be safe. Oil can travel easily and quite far along harnesses.

Do you know what it’s called ?

[fastboatster]

you can't plug it to anything right now because you removed the TB. that's an evap solenoid hose, it goes to the TB.
P.S. I totally didn’t read and thought you were talking about that hose, not that electric connector

[Hoody007]

If memory serves the thing circled in blue runs to the alternator. Or the starter. Can’t remember which, it’s been a while. If you can wait I can spin up ISTA and look for you.